How to Reset an LG Washer: Easy Step-by-Step Guide
Learn how to reset an LG washer using simple methods. Follow this guide to reset your LG washing machine and troubleshoot common control and cycle problems.
DIY
9/20/20263 min read
How to Reset an LG Washer
An LG washer may occasionally stop responding, become stuck in a cycle, or display a temporary error. In some cases, resetting the washing machine can clear a temporary electronic glitch and allow it to operate normally again.
The reset procedure can vary by LG washer model, but a basic power reset is a useful first troubleshooting step.
Method 1: Power Reset Your LG Washer
The simplest way to reset an LG washing machine is to disconnect it from power.
Follow These Steps
Step 1: Press the Power button to turn off the washer.
Step 2: Unplug the washing machine from the electrical outlet.
Step 3: Leave the washer unplugged for about 5 minutes.
Step 4: Plug the washer back into the outlet.
Step 5: Turn the washer on.
Step 6: Select a wash cycle and press Start/Pause.
Allow the washer a few moments to respond after restoring power.
Method 2: Reset the Washer Using the Circuit Breaker
If the washer's power cord is difficult to access, you can disconnect its power through the circuit breaker.
Find the circuit breaker that supplies power to the washer.
Switch the breaker to OFF.
Wait approximately 5 minutes.
Switch the breaker back to ON.
Turn on the LG washer.
Select a cycle and start the machine.
This completely interrupts the washer's electrical supply and can help clear certain temporary control problems.
Method 3: Cancel the Current Cycle
If your LG washer is still responding to the controls, you may not need a full power reset.
Press Power or use the appropriate Cancel function for your model. Once the current cycle has stopped, select a new wash program and press Start/Pause.
This can be useful when the washer is simply stuck in an unwanted cycle.
When Should You Reset an LG Washer?
A reset can be worth trying when you notice problems such as:
The washer is not responding to buttons
The washing machine is stuck in a cycle
The control panel appears frozen
The washer stops unexpectedly
A temporary error appears
The washer does not start normally
The cycle does not complete
A reset is primarily a troubleshooting step. It does not repair a defective component.
What to Do If the LG Washer Still Does Not Work
If resetting the washing machine does not solve the problem, check a few basic things before assuming the washer needs a major repair.
Check the Power Supply
Make sure the power cord is firmly connected and that the electrical outlet is working.
Also check the household circuit breaker for the washer.
Check the Door or Lid
An LG washer may not start if the door or lid is not properly closed.
Make sure clothing or other objects are not preventing it from closing completely.
Check the Water Supply
If the washer turns on but does not fill, check that the water supply valves are open.
Also inspect the inlet hoses for kinks or obvious restrictions.
Look for an Error Code
If an error code appears after resetting the washer, write it down.
The code can help identify the system causing the problem. LG washer error codes can vary depending on the model, so use the instructions for your specific appliance.
Does Resetting an LG Washer Erase an Error Code?
A power reset can sometimes temporarily clear an error displayed because of an electronic glitch.
However, if the washer detects the same underlying problem again, the error code may return.
For example, a continuing water supply, drainage, door-lock, or motor problem will generally require troubleshooting rather than repeated resets.
How Long Should You Unplug an LG Washer?
For a basic reset, leaving the LG washer disconnected from power for around 5 minutes is a practical starting point.
After reconnecting it, wait briefly before selecting a cycle and starting the machine.
What If the Washer Keeps Having the Same Problem?
If the same problem returns after every reset, avoid repeatedly resetting the machine without investigating the cause.
Pay attention to:
Error codes
Unusual noises
Water remaining in the drum
Failure to drain
Failure to spin
Door-lock problems
Water filling problems
Repeated cycle interruptions
These symptoms can provide clues about the underlying problem.
When to Get Professional Help
A professional inspection may be necessary if your LG washer:
Will not turn on
Repeatedly displays the same error
Does not drain
Does not spin
Makes loud or unusual noises
Leaks water
Trips the circuit breaker repeatedly
Has a burning smell
Disconnect the washer from power if you notice smoke, exposed electrical wiring, or a burning odor.
Final Takeaway
Resetting an LG washer is a straightforward troubleshooting step. Start by turning off the washer, unplugging it for about 5 minutes, reconnecting the power, and starting a new cycle.
If the washer continues to malfunction, check the power supply, door or lid, water supply, and any displayed error codes. A problem that returns after a reset may indicate an underlying mechanical, electrical, or control issue that requires further diagnosis.