LG Dishwasher PF Error Code – Power Failure Fix Guide

⚡ What Is PF Error on an LG Dishwasher?

The PF error code means Power Failure.

It appears when:

• Power supply is interrupted

• Voltage fluctuates

• The dishwasher was unplugged or restarted mid-cycle

This error is more of a warning than a serious fault.

🚨 What Happens When PF Error Appears?

• Dishwasher stops mid-cycle

• Display shows “PF”

• Cycle progress is lost

• Machine may need a restart

🛠️ Step-by-Step Fix (Follow in Order)

1. Restart the Dishwasher

• Press Power Off

• Wait 5–10 minutes

• Turn it back on

👉 In many cases, this alone clears the error.

2. Check Power Connection

• Ensure plug is tightly connected

• Avoid loose sockets

3. Inspect Circuit Breaker

• Go to your home electrical panel

• Reset any tripped breaker

4. Resume or Restart Cycle

• Select your wash cycle again

• Start fresh if needed

5. Use a Stable Power Source

If power cuts are frequent:

• Avoid running during unstable supply

• Consider a stabilizer or UPS

❗ When PF Error Is NOT Normal

Call a technician if:

• PF appears frequently without power cuts

• Dishwasher shuts off randomly

• Display flickers or resets often

This could indicate:

• Faulty wiring

• Control board issue

• Internal electrical failure

🧠 Pro Tips to Prevent PF Error

• Run dishwasher during stable electricity hours

• Use surge protection if possible

• Avoid unplugging mid-cycle

• Keep wiring and sockets in good condition

📌 Quick Summary

• PF = Power Failure

• Usually caused by external power issues

• Easy to fix with a restart

• Frequent errors may need inspection

Read More:

How to reset a dishwasher

How to reset a dishwasher float switch

Dishwasher flashing lights? Causes, Meaning, and Fixes

How to reset a dishwasher control board with easy fix guide

Dishwasher flooded? Here's how to clean it properly