LG Washer Error Code FO: Meaning, Causes, and Easy Fixes
LG washer error code FO indicates a water overflow issue in the washing machine. Learn what causes the FO error, how to fix it, and when to call a technician.
ERROR CODES
3/4/20262 min read
What Is LG Washer Error Code FO?
If your LG washing machine shows FO on the display, it usually means the washer has detected a water overflow condition.
This error appears when the machine senses that too much water has entered the drum or when the washer cannot properly control the water level. To prevent flooding or damage, the washer may stop the cycle and start draining the water automatically.
Quick Signs You Might Notice
When the FO error code appears, you may notice:
The washer stops during the cycle
Water keeps filling or draining unexpectedly
The machine displays FO on the screen
The drain pump may run continuously
Main Causes of LG Washer FO Error
Below are the most common reasons this error occurs.
Faulty Water Inlet Valve
The water inlet valve controls how much water enters the washer. If it gets stuck open, too much water may enter the drum.
Defective Water Level Sensor
The pressure sensor measures the water level in the washer. If it sends incorrect signals, the machine may think the water level is too high.
Blocked Pressure Hose
The hose connected to the water level sensor can become clogged with debris or detergent buildup, causing incorrect readings.
Control Board Malfunction
In rare cases, the washer’s main control board may fail to regulate the water intake properly.
How to Fix LG Washer Error Code FO
Try the following steps to resolve the issue.
Turn Off the Washer
Press the Power button to stop the machine and unplug it from the electrical outlet.
Restart the Washer
Wait about 5 minutes before plugging the washer back in and starting a new cycle.
Check the Water Supply
Ensure the water inlet valves are not stuck open and that the water pressure is normal.
Inspect the Pressure Hose
If accessible, check the hose connected to the water level sensor for blockages or damage.
Prevention Tips
Following these practices can help prevent the FO error.
Avoid using excessive detergent
Clean the washer regularly
Ensure proper water pressure
Run a monthly tub cleaning cycle
These habits help maintain proper water level control inside the machine.
When to Call a Professional
If the FO error code keeps appearing, the washer may have a problem with:
The water inlet valve
The pressure sensor
Internal wiring
The control board
A qualified technician can diagnose and repair these components safely.
Final Thoughts
The LG washer error code FO indicates that the machine has detected a water overflow situation. In many cases, restarting the washer and checking the water supply can resolve the issue.
If the problem continues, inspecting the water level system or contacting a technician may be necessary to keep your LG washer operating safely and efficiently.
Read More: