LG Washer Error Code IE – Quick Troubleshooting Guide

Q1. What does LG washer error code IE mean?

The IE error code stands for Inlet Error.
It appears when the washer does not receive enough water within the required time to start or continue a wash cycle.

Q2. When does the IE error usually appear?

The IE error typically shows up:

• Right after pressing Start

• During the initial fill stage

• When the washer tries to rinse

The cycle stops because the drum does not fill properly.

Q3. What are the most common causes of IE error?

On LG washers, IE is most often caused by:

• Water taps turned off or partially open

• Low water pressure

• Bent or kinked inlet hoses

• Clogged inlet hose filters

• Faulty water inlet valve

Q4. What should I check first when IE appears?

Start with these simple checks:

• Make sure hot and cold water taps are fully open

• Confirm water flows strongly from the tap

• Check that inlet hoses are not twisted

These steps fix many IE errors instantly.

Q5. How do I clean the inlet hose filters?

• Turn off water supply

• Disconnect inlet hoses from the washer

• Remove the small mesh filters

• Rinse under clean running water

• Reinstall filters and reconnect hoses

Blocked filters are a very common cause of IE errors.

Q6. Can low water pressure trigger IE error?

Yes.
If household water pressure is too low, the washer cannot fill fast enough and will show IE. Avoid running multiple water-heavy appliances at the same time.

Q7. What if the IE error keeps coming back?

If basic checks do not work:

• The water inlet valve may be defective

• The washer may not be opening the valve properly

This usually requires part replacement.

Q8. Should I reset the washer?

Yes, as a final step.

• Unplug the washer for 10 minutes

• Plug it back in

• Start a new cycle

This can clear temporary electronic faults.

Q9. Is it safe to keep using the washer with IE error?

No.
Using the washer without proper water intake can lead to poor cleaning and potential internal damage.

Q10. How can I prevent IE error in the future?

• Clean inlet filters regularly

• Keep water taps fully open

• Replace old inlet hoses

• Maintain proper water pressure

  The LG washer error code IE indicates a water inlet problem, most often caused by closed taps or clogged inlet filters. With quick checks and basic maintenance, most IE errors can be resolved at home without professional help.