Maytag Oven Error Code F3 E2: Causes, Fixes, and Easy Troubleshooting Guide

What Does Maytag Oven Error Code F3 E2 Mean?

If your Maytag oven is showing the F3 E2 error code, it usually means there is a problem with the oven temperature sensor.

In simple terms, your oven is either:

• Getting incorrect temperature readings

• Or detecting a temperature that is too high or unsafe

This causes the oven to shut down or stop heating properly to prevent damage.

Common Causes of F3 E2 Error Code

Here are the most common reasons why this error appears:

1. Faulty Oven Temperature Sensor

The sensor may be damaged or worn out over time, sending wrong signals to the control board.

2. Loose or Damaged Wiring

Wires connecting the sensor to the control board may be:

• Loose

• Burnt

• Broken

3. Control Board Malfunction

The electronic control board might misread signals even if the sensor is working fine.

4. Overheating Issue

If your oven overheats due to internal issues, it can trigger this error code as a safety measure.

How to Fix Maytag Oven Error Code F3 E2

Follow these simple troubleshooting steps:

Step 1: Reset the Oven

• Turn off the oven

• Unplug it from the power source

• Wait for 5–10 minutes

• Plug it back in and restart

👉 Sometimes, a simple reset clears the error.

Step 2: Check the Temperature Sensor

• Locate the sensor inside the oven (usually at the back wall)

• Inspect for visible damage

• Use a multimeter to check resistance (should be ~1100 ohms at room temperature)

👉 If readings are off, replace the sensor.

Step 3: Inspect Wiring Connections

• Turn off power

• Check wires connected to the sensor

• Look for burns, breaks, or loose connections

👉 Repair or replace damaged wiring.

Step 4: Replace the Sensor (If Needed)

If the sensor is faulty:

• Purchase a compatible Maytag oven temperature sensor

• Remove screws holding the sensor

• Disconnect wiring and install the new one

Step 5: Check the Control Board

If the problem persists:

• The control board may be defective

• This usually requires professional repair or replacement

When Should You Call a Technician?

You should consider professional help if:

• The error keeps returning after reset

• Wiring looks fine but the issue remains

• You suspect a control board issue

Tips to Prevent This Error in Future

• Avoid overheating the oven

• Clean regularly to prevent internal damage

• Do not slam the oven door

• Schedule occasional maintenance checks

Final Thoughts

The Maytag Oven Error Code F3 E2 is usually related to a faulty temperature sensor or wiring issue. The good news is that it’s often easy to diagnose and fix at home with basic tools.

Start with a reset, check the sensor, and inspect wiring. If needed, replace the sensor or consult a technician.