How to Reset a Maytag Dryer

When Should You Reset a Maytag Dryer?

Sometimes a Maytag dryer may stop responding, refuse to start, or show an error code. In many cases, the issue is caused by a small electronic glitch.

Resetting the dryer can restore the control board and clear temporary faults.

You may need to reset your Maytag dryer if:

• The dryer will not start

• The control panel is frozen

• The dryer stopped during a cycle

• Error codes appear on the display

• Buttons are not responding

A reset is often the first troubleshooting step recommended for these problems.

Method 1: Basic Power Reset

The simplest way to reset a Maytag dryer is to restart the power supply.

Steps

1. Turn off the dryer using the power button.

2. Unplug the dryer from the wall outlet.

3. Wait about 5 minutes.

4. Plug the dryer back in.

5. Turn the dryer on and start a cycle.

This method resets the electronic control board and fixes many minor issues.

Method 2: Reset Using the Circuit Breaker

If unplugging the dryer is not possible, you can reset it through the circuit breaker.

Steps

1. Go to your home's electrical panel.

2. Find the breaker labeled dryer.

3. Turn the breaker OFF.

4. Wait about 5 minutes.

5. Turn the breaker back ON.

6. Start the dryer to check if it works.

This method cuts power completely and performs a full system reset.

Method 3: Control Panel Reset

Some Maytag dryers allow a control panel reset using the buttons.

Steps

1. Turn the dryer OFF.

2. Press and hold the Start/Pause button for about 5 seconds.

3. Release the button.

4. Turn the dryer back ON.

If your model supports this feature, the control system will reset.

What Problems Can a Reset Fix?

A reset may solve several common issues, including:

• Dryer not starting

• Error codes on the display

• Frozen or unresponsive controls

• Interrupted drying cycles

• Minor software glitches

However, a reset will not fix damaged parts.

When Resetting Does Not Work

If the dryer still does not work after resetting, there may be a hardware problem such as:

• Blown thermal fuse

• Faulty door switch

• Broken heating element

• Control board malfunction

In these situations, replacing the faulty part or calling a technician may be necessary.

Final Thoughts

Resetting a Maytag dryer is a quick and simple troubleshooting step that can solve many minor problems. Most resets only require unplugging the dryer or resetting the circuit breaker for a few minutes.

If the dryer continues to show errors or refuses to start after a reset, a deeper mechanical or electrical issue may be involved.

Performing a reset first can save time and help you determine whether the issue is minor or requires repair.

Read More:

How to reset a Whirlpool dryer

Whirlpool dryer not heating

How to fix a Maytag dryer not heating

How to reset an LG Dryer