How to Reset an LG Dryer | Step-by-Step Troubleshooting Guide
Learn how to reset an LG dryer using simple methods like power reset and breaker reset. Fix common problems such as error codes and unresponsive controls.
DIY
3/10/20262 min read
LG dryers are designed with electronic control systems that manage drying cycles, temperature, and safety features. Sometimes the system may experience a temporary glitch that causes the dryer to stop working properly.
When this happens, performing a reset can help restore the dryer to normal operation.
A reset clears temporary electronic errors and allows the control board to restart.
Situations Where Resetting May Help
Resetting an LG dryer can solve several common issues.
These include:
The dryer will not start
The control panel is not responding
Error codes appear on the display
The dryer stopped mid-cycle
The dryer powers on but does not run
If you experience these problems, a reset should be the first troubleshooting step.
Method 1: Basic Power Reset
A power reset is the easiest and most common way to reset an LG dryer.
Steps to Follow
Turn off the dryer using the power button.
Unplug the dryer from the electrical outlet.
Wait about 5 minutes to allow the system to fully reset.
Plug the dryer back into the outlet.
Turn the dryer on and run a short test cycle.
This process restarts the internal control board.
Method 2: Circuit Breaker Reset
If unplugging the dryer is not convenient, resetting the circuit breaker can achieve the same result.
Steps to Follow
Locate your home’s electrical panel.
Find the breaker labeled dryer.
Switch the breaker OFF.
Wait approximately 5 minutes.
Turn the breaker back ON.
Start the dryer again to see if the issue is resolved.
This method cuts power completely and resets the system.
Method 3: Control Panel Reset
Some LG dryer models allow you to reset the system using the control panel.
Steps to Follow
Turn the dryer OFF.
Press and hold the Start/Pause button for about 5 seconds.
Release the button.
Turn the dryer ON again.
If your model supports this feature, the control board will reset.
What a Reset Can Fix
Resetting your LG dryer may resolve the following problems:
Temporary error codes
Frozen control panel
Interrupted drying cycles
Minor electronic glitches
Dryer not responding to commands
However, a reset will not repair damaged components.
When the Dryer Still Does Not Work
If resetting the dryer does not fix the problem, the issue may be caused by a faulty component.
Possible causes include:
Blown thermal fuse
Faulty door switch
Damaged heating element
Defective control board
In these cases, further troubleshooting or professional repair may be necessary.
Conclusion
Resetting an LG dryer is a quick and simple troubleshooting step that can solve many common issues. Most problems can be resolved by unplugging the dryer for a few minutes or resetting the circuit breaker.
If the dryer continues to show errors or refuses to start after resetting, the problem may involve a mechanical or electrical component that needs repair.
Trying a reset first can save time and help determine whether the issue is minor or more serious.
Read More: