Samsung Dryer Error Code TE: Temperature Error Explained
Samsung dryer error code TE indicates a temperature sensing problem. Learn what the TE error means, common causes, quick fixes, and when professional repair is needed.
DRYER ERROR
1/24/20261 min read
🔎 What Does Samsung Dryer Error Code TE Mean?
TE = Temperature Error
The dryer’s control board is receiving abnormal temperature readings
Usually linked to a faulty thermistor (temperature sensor) or wiring issue
Dryer shuts down to prevent overheating or unsafe operation
This safety feature is built into dryers made by Samsung Electronics.
🚨 Common Symptoms
Dryer stops mid-cycle
TE code flashes on the display
Dryer may not start at all
Inconsistent heating
Clothes remain damp after long cycles
🧩 Most Common Causes
Failed or inaccurate thermistor
Loose or damaged sensor wiring
Moisture or lint buildup near sensor
Overheating caused by poor airflow
Control board misreading temperature
🛠️ Quick Fix Checklist
✔ Step 1: Power Reset
Unplug dryer for 5–10 minutes
Plug back in and restart
If TE disappears, it was a temporary error
✔ Step 2: Check Airflow
Poor airflow can cause false temperature readings.
Clean lint filter
Inspect vent hose
Ensure outside vent flap opens freely
✔ Step 3: Inspect the Temperature Sensor
Unplug dryer
Access thermistor (near blower or heater housing)
Check for loose connectors or corrosion
✔ Step 4: Test Thermistor (Advanced)
Use a multimeter
Normal resistance is usually around 10k ohms at room temperature
No reading or incorrect value = replace sensor
⛔ Can You Use the Dryer With a TE Error?
No.
Dryer may overheat or shut down repeatedly
Heating components can be damaged
Safety systems prevent continued operation
📞 When to Call a Technician
TE error keeps returning
Thermistor tests faulty
Wiring damage is visible
Control board suspected
Thermistor replacement is usually affordable and quick.
🔐 Prevention Tips
Clean lint filter after every load
Deep-clean vents every 6–12 months
Do not overload the dryer
Keep dryer area well-ventilated
Samsung dryer error code TE is a temperature sensing error, most often caused by a faulty thermistor or airflow issue. Simple airflow checks may help, but persistent TE errors usually require sensor replacement or professional service.
Read More: